top of page
Red Wolf Wiki

PAGE CONTENTS

Protect Wiki

_DSC8673-Edit copy.jpg

Welcome to the Red Wolf Technology Learning Management System. In this series, we will guide you through every step of using your new Primo Protect Machine to cut custom screen protectors for devices. Whether you're setting up your machine for the first time or troubleshooting common issues, our detailed videos and text explanations will ensure you get the most out of your Primo Protect Machine experience.

PAGE CONTENTS

MK 1 Protect Machine

Mk1-machine.png

The Primo Protect Machine

In this section, you'll get acquainted with your new Primo Protect Machine. We’ll walk you through the unboxing process, highlighting all the components included in the package and offering helpful tips to ensure a smooth setup. Then, we'll guide you through setting up the machine, including steps for connecting it to power and Wi-Fi, followed by the initial calibration. By the end of this section, your Primo Protect Machine will be ready for its first cut and you'll be prepared for your first screen protector application. 

MK 1 Machine

primo-protect-sketch-nobg.png

Appearance and Function

Machine-Diagram.jpg
Machine-Diagram-info.jpg
Screenshot 2024-01-29 at 1.10.22 PM.png
Blade-Cutting-diagram.jpg

Instructions

1) Installing The Blade Holder

Instructions-Part-1.jpg

2) Power Connection, Starting Up

Please use an AC power supply rated for 100-240 volts. Connect the adapter and power cord, and plug the other end of the power cord into the AC power outlet. Connect the adapter's DC output line plug to the film cutter's input port. Ensure that the blade holder is securely installed in the correct position on the carriage head. Once the connection and installation are done, press the power button to activate the device.

Instructions-Part-2.jpg

 ​3) Screen Film Cutter Machine Operation

When using it for the first time, select "Set Network" to establish a Wi-Fi connection. Then, select "Settings" in the upper right and select "Language Settings" to change languages.

operation-1.jpg

After the system starts normally, enter the homepapge and the device and brand you want to cut.

operation-2-03.jpg

Next, select a model of phone. Then, you will have multiple option from case friendly to the back of the phone.

operation-4.jpg

Next, select a model of phone. Then, you will have multiple option from case friendly to the back of the phone.

Next, select a model of phone. Then, you will have multiple option from case friendly to the back of the phone.

operation-5.jpg

4) Cutting Film

To ensure a proper cutting process, please prepare a protective film according to the image provided. Make sure the protective film is placed flat and that the film layer is intact without any bending, folding, or missing layers.

Loading-Film.jpg

With automatic paper feeding: Push the protective film smoothly to the dotted area to let go.

Loading-Film-2.jpg

Once you have verified that the protective film is correctly positioned, proceed to the screen display and select the desired model of protective film (e.g., front case friendly). Then, simply click on "Start Cutting" to initiate the cutting process.  

 

Once the cutting process is complete, the protective film will be automatically pushed out. Remove the protective film from the machine and apply it onto your device.

5) Other

Please note that the content of the manual is subject to irregular revisions based on product upgrades, and it may differ from the actual product. Therefore, it is recommended to refer to the actual product for accurate information. We apologize for any inconvenience this may cause.

Screenshot 2024-01-29 at 1.16.38 PM.png
warning.jpg

Micro Machine

Appearance and Function​

Screenshot 2024-01-29 at 1.10.16 PM.png
Screenshot 2024-01-29 at 1.10.22 PM.png
Blade-Cutting-diagram.jpg

Instructions

1) Installing The Blade Holder

Screenshot 2024-01-29 at 1.10.42 PM.png

2) Power Connection, Starting Up

Screenshot 2024-01-29 at 1.10.46 PM.png

Please use an AC power supply rated for 100-240 volts. Connect the adapter and power cord, and plug the other end of the power cord into the AC power outlet. Connect the adapter's DC output line plug to the film cutter's input port. Ensure that the blade holder is securely installed in the correct position on the carriage head. Once the connection and installation are done, press the power button to activate the device.

3) Screen Film Cutter Machine Operation

When using it for the first time, select "Set Network" to establish a Wi-Fi connection. Then, select "Settings" in the upper right and select "Language Settings" to change languages.

operation-1.jpg

After the system starts normally, enter the homepage and the device and brand you want to cut.

operation-2-03.jpg

Next, select a model of phone. Then, you will have multiple option from case friendly to the back of the phone.

operation-4.jpg
operation-5.jpg

4) ​Cutting Film

To ensure a proper cutting process, please prepare a protective film according to the image provided. Make sure the protective film is placed flat and that the film layer is intact without any bending, folding, or missing layers.

Loading-Film.jpg

With automatic paper feeding: Push the protective film smoothly to the dotted area to let go.

Screenshot 2024-01-29 at 1.15.26 PM.png

Once you have verified that the protective film is correctly positioned, proceed to the screen display and select the desired model of protective film (e.g., front case friendly). Then, simply click on "Start Cutting" to initiate the cutting process.  

 

Once the cutting process is complete, the protective film will be automatically pushed out. Remove the protective film from the machine and apply it onto your device.

5) Other

Please note that the content of the manual is subject to irregular revisions based on product upgrades, and it may differ from the actual product. Therefore, it is recommended to refer to the actual product for accurate information. We apologize for any inconvenience this may cause.

warning.jpg
Screenshot 2024-01-29 at 1.16.38 PM.png

Screen Application

Wet and Dry Install

Explore the different installation methods of Primo Protect, including both the wet and dry install. These videos will walk you through the differences between them, and what materials you need.

Wet Install

Gather your cut screen, and your application solution and cleaning cloth for wet install. This video will walk you through the application, the purpose of the materials and how to use them correctly. 

Dry Install

Gather your cut screen protector and a microfiber cleaning cloth. This video will guide you through the installation process, explaining the purpose of the materials and how to use them properly.

Screens Protectors

Screen Protectors

Choosing the right screen protector is crucial for the durability and clarity of your device. This section covers the types of screen protectors compatible with your devices, and how to apply and replace them, and tips for selecting the best materials for different types of phone screens.

Screen Protectors

We offer a variety of screen protectors to suite your specialized needs. ​

Screenshot 2024-11-08 174341.png
Screenshot 2024-11-11 153436.png
Screenshot 2024-11-11 153654.png

Maintenance

Maintenance

Regular maintenance will keep your Primo Protect Machine in top condition. These video covers essential maintenance tasks, including cleaning and routine checks, to ensure your machine continues to perform optimally.

Troubleshooting

Troubleshooting

Encountering a problem? This section provides solutions to common issues you might face while using the Primo Print3D Machine. From print errors to connectivity issues, we'll help you troubleshoot and resolve these problems quickly. If you need further assistance, our customer support team is always here to help.

Absence of devices in library

Potential Solutions: 

  1. Turn off machine completely and back on (unplug)

  2. Turn off wifi, and turn back on

  3. Turn data to offline mode (default?)

  4. Turn data to online mode

    1. Go to Settings (top-right corner)

    2. Go to Set Up

    3. Go to Program Settings

      1. Enter Code: 123456

    4. Go to Data Mode

      1. Select Online Mode

    5. Wait for Machine to restart

    6. Check Library

bottom of page