top of page

Getting Started

MACHINE OPPERATION

primo-protect-sketch-nobg.png
Primo-Protect-Micro-Cutter-Illustration.png

Packaging List

Parts-Diagram.jpg

Appearance and Function​

Machine-Diagram.jpg
Machine-Diagram-info.jpg
Blade-Diagram.jpg
Blade-Cutting-diagram.jpg

Instructions

1 | Installing The Blade Holder

Instructions-Part-1.jpg

2 | Power Connection, Starting Up

Instructions-Part-2.jpg

Please use an AC power supply rated for 100-240 volts. Connect the adapter and power cord, and plug the other end of the power cord into the AC power outlet. Connect the adapter's DC output line plug to the film cutter's input port. Ensure that the blade holder is securely installed in the correct position on the carriage head. Once the connection and installation are done, press the power button to activate the device.

| ​Screen Film Cutter Machine Operation

When using it for the first time, select "Set Network" to establish a Wi-Fi connection. Then, select"Settings" in the upper right and select "Language Settings" to change languages.

operation-1.jpg

After the system starts normally, enter the homepapge and the device and brand you want to cut.

operation-2-03.jpg

Next, select a model of phone. Then, you will have multiple option from case friendly to the back of the phone.

operation-4.jpg

Next, select a model of phone. Then, you will have multiple option from case friendly to the back of the phone.

operation-5.jpg

| ​Cutting Film

To ensure a proper cutting process, please prepare a protective film according to the image provided. Make sure the protective film is placed flat and that the film layer is intact without any bending, folding, or missing layers.

Loading-Film.jpg

With automatic paper feeding: Push the protective film smoothly to the dotted area to let go.

5| Other

Please note that the content of the manual is subject to irregular revisions based on product upgrades, and it may differ from the actual product. Therefore, it is recommended to refer to the actual product for accurate information. We apologize for any inconvenience this may cause.

product-paramaters.jpg
Loading-Film-2.jpg

Once you have verified that the protective film is correctly positioned, proceed to the screen display and select the desired model of protective film (e.g., front case friendly). Then, simply click on "Start Cutting" to initiate the cutting process.  

 

Once the cutting process is complete, the protective film will be automatically pushed out. Remove the protective film from the machine and apply it onto your device.

warning.jpg
bottom of page